Titanium and Titanium Alloy Tubes
Heat Exchanger Tubes
ASTM B338 Gr.1
ASTM B338 Gr.2
ASTM B338 Gr.3
ASTM B338 Gr.7
ASTM B338 Gr.9
ASTM B338 Gr.11
ASTM B338 Gr.12
ASTM B338 Gr.16
ASTM B338 Gr.17
Standard ASTM B338
Heat Exchanger
Shell and Tube Heat Exchanger
Product

 

 

 

 

 


Home | About Us | Product | Know How | Contact Us
   
ASTM B338 Standard Specification for Seamless and Welded Titanium and Titanium Alloy Tubes for Condensers and Heat Exchangers
Our titanium tubes are widely used for the applications of heat exchangers, condensers, evaporators, industry field, aerospace, architectural, automotive, biomedical, chemical processing, marine, military, oil, tooling, racing, all kinds of corrosive fluid transmission pipeline system, titanium bicycle tube, automobile exhaust pipe and offshore aquaculture.
Standard: ASTM B338
Material: Grade 1
Chemistry Composition
N, %
C, %
H, %
Fe, %
O, %
Ti, %
0.03 max
0.08 max
0.015 max
0.20 max
0.18 max
Balance
Mechanical Properties
Tensile Strength , MPa
Yield Strength, MPa
Elongation, %
240 min
170-310
24 min
Outside Diameter & Tolerance
Outside Diameter, mm 
Tolerance, mm 
OD<25.4
±0.102
25.4≤OD<38.1
±0.127
38.1≤OD<50.8
±0.152
50.8≤OD<63.5
±0.178
63.5≤OD<88.9
±0.254
Wall thickness & Tolerance
Outside Diameter, mm 
Tolerance, %
OD<25.4
±0.10
25.4≤OD<38.1
±0.10
38.1≤OD<50.8
±0.10
50.8≤OD<63.5
±0.10
63.5≤OD<88.9
±0.10
Some sizes requested by clients
OD (mm)
WT (mm)
OD (mm)
WT (mm)
OD (mm)
WT (mm)
3.3
0.25
24
0.7
33.4
4.55
4
0.25
25
0.5
38
1.2
4.9
0.3
25
0.7
38.1
1.24
6.35
0.889
25
1.5
40
0.5
12.7
0.8
25
2
45
1.5
15.88
0.5
25
2.2
45
2
15.88
0.71
25.4
0.89
48.26
1.65
19
0.508
25.4
1.07
48.3
5.08
19
0.711
25.4
1.473
50.8
0.7
19
0.9
25.4
2.108
50.8
0.889
19
1.24
26.67
2.11
50.8
0.9
19.05
0.56
26.67
3.912
51
1.5
19.05
0.9
31.75
0.7112
56
0.8
19.05
1.24
31.75
0.889
60.3
1.5
19.05
1.65
31.75
1
60.325
0.889
19.05
3
31.8
0.89
62
2
21.34
2.11
33.4
2.77
89
2
24
0.5
33.4
3.38
114.3
3.05
Titanium tubing are delivered in straight lengths or as U-bent tubing. Titanium spiral tubing, titanium capillary tubing are available by requirement. Length: 4000mm; 6000mm; 12000mm; Multi-length and short cutting can be provided. Max developed length: 20 meters.
Features: low density, high specific strength, excellent corrosive resistance, no rust, good thermal stability, good thermal conductivity, biological features, plasticity, etc.
Inspection & Test: ultrasonic testing (UT), electric non-destructive testing (ET), flaring test, hydrostatic test, flattening test, visual surface inspection, dimensional inspection, tensile properties inspection and chemical elements analysis.

Titanium is a chemical element with the symbol Ti and atomic number 22. Sometimes called the “space age metal”, it has a low density and is a strong, lustrous, corrosion-resistant (including to sea water and chlorine) transition metal with a silver colour. Titanium can be alloyed with iron, aluminium, vanadium, molybdenum, among other elements, to produce strong lightweight alloys for aerospace (jet engines, missiles, and spacecraft), military, industrial process (chemicals and petro-chemicals, desalination plants, pulp, and paper), automotive, agri-food, medical prostheses, orthopedic implants, dental and endodontic instruments and files, dental implants, sporting goods, jewelry, mobile phones, and other applications. Titanium was discovered in England by William Gregor in 1791 and named by Martin Heinrich Klaproth for the Titans of Greek mythology.

The element occurs within a number of mineral deposits, principally rutile and ilmenite, which are widely distributed in the Earth's crust and lithosphere, and it is found in almost all living things, rocks, water bodies, and soils. The metal is extracted from its principal mineral ores via the Kroll process or the Hunter process. Its most common compound, titanium dioxide, is used in the manufacture of white pigments. Other compounds include titanium tetrachloride (TiCl4) (used in smoke screens/skywriting and as a catalyst) and titanium trichloride (TiCl3) (used as a catalyst in the production of polypropylene).

The two most useful properties of the metal form are corrosion resistance, and the highest strength-to-weight ratio of any metal. In its unalloyed condition, titanium is as strong as some steels, but 45% lighter. There are two allotropic forms and five naturally occurring isotopes of this element; 46Ti through 50Ti, with 48Ti being the most abundant (73.8%). Titanium's properties are chemically and physically similar to zirconium.

Titanium alloys are metallic materials which contain a mixture of titanium and other chemical elements. Such alloys have very high tensile strength and toughness (even at extreme temperatures), light weight, extraordinary corrosion resistance, and ability to withstand extreme temperatures. However, the high cost of both raw materials and processing limit their use to military applications, aircraft, spacecraft, medical devices, connecting rods on expensive sports cars and some premium sports equipment and consumer electronics. Auto manufacturers Porsche and Ferrari also use titanium alloys in engine components due to its durable properties in these high stress engine environments.

Although "commercially pure" titanium has acceptable mechanical properties and has been used for orthopedic and dental implants, for most applications titanium is alloyed with small amounts of aluminium and vanadium, typically 6% and 4% respectively, by weight. This mixture has a solid solubility which varies dramatically with temperature, allowing it to undergo precipitation strengthening. This heat treatment process is carried out after the alloy has been worked into its final shape but before it is put to use, allowing much easier fabrication of a high-strength product.

Some alloying elements raise the alpha-to-beta transition temperature (i.e. alpha stabilizers) while others lower the transition temperature (i.e. beta stabilizers). Aluminium, gallium, germanium, carbon, oxygen and nitrogen are alpha stabilizers. Molybdenum, vanadium, tantalum, niobium, manganese, iron, chromium, cobalt, nickel, copper and silicon are beta stabilizers.

Titanium Alloys are generally classified into four main categories:

- Alpha alloys in which neutral alloying elements (such as tin) and/ or alpha stabilisers (such as Aluminium or oxygen only. These are not heat treatable.
- Near-alpha alloys contain small amount of ductile beta-phase. Besides alpha-phase stabilisers, near-alpha alloys are alloyed with 1-2% of beta phase stabilizers such as molybdenum, silicon or Vanadium.
- Alpha & Beta Alloys, which are metastable and generally include some combination of both alpha and beta stabilisers, and which can be heat treated.
- Beta Alloys, which are metastable and which contain sufficient beta stabilisers (such as Molybdenum, silicon and Vanadium to allow them to maintain the beta phase when quenched, and which can also be solution treated and aged improve strength.

Generally, alpha-phase Titanium is stronger yet less ductile and beta-phase Titanium is more ductile. Alpha-beta-phase Titanium has a mechanical property which is in between both.

Titanium dioxide dissolves in the metal at high temperatures, and its formation is very energetic. These two factors mean that all titanium except the most carefully purified has a significant amount of dissolved oxygen, and so may be considered a Ti-O alloy. Oxide precipitates offer some strength (as discussed above), but are not very responsive to heat treatment and can substantially decrease the alloy's toughness.

Aside from titanium-based alloys, the term may refer to "binary" alloys which consist of a nearly even mix, atom-by-atom, of titanium and another element. Nitinol, a shape memory alloy, is a mixture of titanium and nickel, while niobium-titanium alloys are used as wires for superconducting magnets.

Many alloys also contain titanium as a minor additive, but since alloys are usually categorized according to which element forms the majority of the material, these are not usually considered to be "titanium alloys" as such. See the sub-article on titanium applications.

Titanium is a strong, light metal. It is as strong as steel but 45% lighter. It is also twice as strong as aluminium but only 60% heavier. Titanium is not easily corroded by sea water and is used in propeller shafts, rigging and other parts of boats that are exposed to sea water. Titanium and titanium alloys are used in airplanes, missiles and rockets where strength, low weight and resistance to high temperatures are important. Since titanium does not react within the human body, it is used to create artificial hips, pins for setting bones and for other biological implants. Unfortunately, the high cost of titanium has limited its widespread use. Titanium is the ninth most abundant element in the earth's crust and is primarily found in the minerals Rutile (TiO2), Ilmenite (FeTiO3) and Sphene (CaTiSiO5). Titanium makes up about 0.57% of the earth's crust. The word titanium comes from the Greek word Titans the mythological "first sons of the earth". The pure elemental metal was not made until 1910 by Matthew A. Hunter, who heated TiCl4 together with sodium in a steel bomb at 700-800°C.

Grades

The ASTM defines a number of alloy standards with a numbering scheme for easy reference.

ASTM Grade 1-4 are unalloyed and considered commercially pure or "CP". Generally the tensile and yield strength goes up with grade number for these "pure" grades. The difference in their physical properties is primarily due to the quantity of interstitial elements. They are used for corrosion resistance applications where cost and ease of fabrication and welding are important.

ASTM Grade 5 is the most commonly used alloy. It has a chemical composition of 6% Aluminium, 4% Vanadium, remainder titanium, and is commonly known as Ti6Al4V, Ti-6AL-4V or simply Ti 6-4. Grade 5 is used extensively in Aerospace, Medical, Marine, and Chemical Processing.

ASTM Grade 6 contains 5% Aluminium and 2.5% Tin. It is also know as Ti-5Al-2.5Sn. This alloy is used in airframes and jet engines due to its good weldability, stability and strength at elevated temperatures.

ASTM Grade 7 contains 0.12 to 0.25% Palladium. This grade is similar to Grade 2. The small quantity of Palladium added gives it enhanced crevice corrosion resistance at low temperatures and high pH.

ASTM Grade 7H contains 0.12 to 0.25% Palladium. This grade has enhanced corrosion resistance.

ASTM Grade 9 contains 3.0% Aluminium and 2.5% Vanadium. This grade is a compromise between the ease of welding and manufacturing of the "pure" grades and the high strength of Grade 5. It is commonly used in aircraft tubing for hydraulics and in athletic equipment.

ASTM Grade 11 contains 0.12 to 0.25% Palladium. This grade has enhanced corrosion resistance.

ASTM Grade 12 contains 0.3% Molybdenum and 0.8% Nickel.

ASTM Grades 13, 14, and 15 all contain 0.5% Nickel and 0.05% Ruthenium.

ASTM Grade 16 contains 0.04 to 0.08% Palladium. This grade has enhanced corrosion resistance.

ASTM Grade 16H contains 0.04 to 0.08% Palladium.

ASTM Grade 17 contains 0.04 to 0.08% Palladium. This grade has enhanced corrosion resistance.

ASTM Grade 18 contains 3% Aluminium, 2.5% Vanadium and 0.04 to 0.08% Palladium. This grade is identical to Grade 9 in terms of mechanical characteristics. The added Palladium gives it increased corrosion resistance.

ASTM Grade 19 contains 3% Aluminium, 8% Vanadium, 6% Chromium, 4% Zirconium, and 4% Molybdenum.

ASTM Grade 20 contains 3% Aluminium, 8% Vanadium, 6% Chromium, 4% Zirconium, 4% Molybdenum and 0.04% to 0.08% Palladium.

ASTM Grade 21 contains 15% Molybdenum, 3% Aluminium, 2.7% Niobium, and 0.25% Silicon.

ASTM Grade 23 contains 6% Aluminium, 4% Vanadium.

ASTM Grade 24 contains 6% Aluminium, 4% Vanadium and 0.04% to 0.08% Palladium.

ASTM Grade 25 contains 6% Aluminium, 4% Vanadium and 0.3% to 0.8% Nickel and 0.04% to 0.08% Palladium.

ASTM Grades 26, 26H, and 27 all contain 0.08 to 0.14% Ruthenium.

ASTM Grade 28 contains 3% Aluminium, 2.5% Vanadium and 0.08 to 0.14% Ruthenium.

ASTM Grade 29 contains 6% Aluminium, 4% Vanadium and 0.08 to 0.14% Ruthenium.

ASTM Grades 30 and 31 contain 0.3% Cobalt and 0.05% Palladium.

ASTM Grade 32 contains 5% Aluminium, 1% Tin, 1% Zirconium, 1% Vanadium, and 0.8% Molybdenum.

ASTM Grades 33 and 34 contain 0.4% Nickel, 0.015% Palladium, 0.025% Ruthenium, and 0.15% Chromium .

ASTM Grade 35 contains 4.5% Aluminium, 2% Molybdenum, 1.6% Vanadium, 0.5% Iron, and 0.3% Silicon.

ASTM Grade 36 contains 45% Niobium.

ASTM Grade 37 contains 1.5% Aluminium.

ASTM Grade 38 contains 4% Aluminium, 2.5% Vanadium, and 1.5% Iron. This grade was developed in the 1990s for use as an armor plating. The iron reduces the amount of Vanadium needed for corrosion resistance. Its mechanical properties are very similar to Grade 5.

Keyword: ASTM B338 Seamless and Welded Titanium and Titanium Alloy Tubes for Condensers and Heat Exchangers, Seamless Tube, Titanium Tubes, Titanium Alloy Tubes, Grade 1, Grade 2, Grade 3, Grade 7, Grade 9, Grade 11, Grade 12, Grade 16, Grade 17
 
Home | About Us | Product | Know How | Contact Us
Copyright © TubeMFG. Powered by TubeSolution