Carbon Steel Pipes
EN 10219 S235JRH
EN 10219 S275J0H
EN 10219 S275J2H
EN 10219 S355J0H
EN 10219 S355J2H
EN 10219 S355K2H
EN 10219 S275NH
EN 10219 S275NLH
EN 10219 S355NH
EN 10219 S355NLH
EN 10219 S460NH
EN 10219 S460NLH
EN 10219 S275MH
EN 10219 S275MLH
EN 10219 S355MH
EN 10219 S355MLH
EN 10219 S420MH
EN 10219 S420MLH
EN 10219 S460MH
EN 10219 S460MLH
Product

 

 

 

 

 


Home | About Us | Product | Know How | Contact Us
   
EN 10219 Cold formed welded structural hollow sections of non-alloy and fine grain steels Part 1: Technical delivery conditions Part 2: Tolerances, dimensions and sectional properties
Standard: EN 10219-1, EN 10219-2
Material: S355MH, 1.8845
Dimensions & Tolerance
Characteristics
Tolerance
Outside Diameter of Size (H:Longest Side; B:Shortest Side)
H<100mm, B<100mm
max ±1% with a min of ±0.5mm
100mm≤H≤200mm, 100mm≤B≤200mm
±0.8%
H>200mm, B>200mm
±0.6%
Wall Thickness
WT≤5mm
±10%
WT>5mm
±0.5mm
Concavity/Convexity
max ±0.8% with a min of ±0.5mm
Squareness of Sides
90°±1°
External Corner Radius
WT≤6mm
1.6WT≤R≤2.4WT
6mm<WT≤10mm
2.0WT≤R≤3.0WT
WT>10mm
2.4WT≤R≤3.6WT
Twist
2mm + 0.5mm/m in length
Straightness
1.5mm/1000mm in total length
Mass
±6% in individual lengths
Length
L<6000mm
+5mm/-0mm
6000mm≤L≤10000mm
+15mm/-0mm
L>10000mm
+5mm/-0mm plus 1mm/m
EN 10219-1 and EN 10219-2 specify the technical delivery conditions, tolerances, dimensions and sectional properties for cold formed welded structural hollow sections of circular, square or rectangular forms and applies to structural hollow sections formed cold without subsequent heat treatment.
Manufacture: hollow sections to EN 10219-1 and EN 10219-2 shall be manufactured by electric welding (ERW) or submerged arc welding (SAW).
Delivery Condition: the hollow sections shall be delivered cold formed without subsequent heat treatment except that the weld seam may be in the as welded or heat treated condition.
Inspection & Test: chemistry composition analysis, tensile test, impact test for qualities J2 and K2, welded pipes NDT of the weld, surface inspection and dimension check.
Keyword: EN 10219-1, EN 10219-2, SHS, RHS, CHS, Square Hollow Section, Rectangular Hollow Section, Circular Hollow Section
 
Home | About Us | Product | Know How | Contact Us
Copyright © TubeMFG. Powered by TubeSolution