Standard
Carbon Steel Pipes
Alloy Steel Pipes
Precision Steel Tubes
ASTM A519 1010
ASTM A519 1020
ASTM A519 1035
ASTM A519 1045
ASTM A519 4130

Home | About Us | Product | Know How | Contact Us
   
ASTM A519 Standard Specification for Seamless Carbon and Alloy Steel Mechanical Tubing
This specification covers for several grades of carbon and alloy steel mechanical tubing, either hot-finished or cold-finished. The steel used in the mechanical tubing may be cast in ingots or may be strand cast. When steel of different grades is sequentially strand cast, identification of the resultant transition material is required. The seamless tubing is a tubular product made without a welded seam. It is usually manufactured by hot working steel, and if necessary, by subsequently cold finishing the hot-worked tubular product to produce the desired shape, dimensions and properties. The tubes shall be furnished in the following shapes: round, square, rectangular and special sections. Heat analysis shall be made to determine the percentages of the elements specified. If secondary melting processes are used, the heat analysis shall be obtained from one remelted ingot or the product of one remelted ingot of each primary melt. The tubing shall be coated with a film of oil before shaping to retard rust when specified.
1. Scope

1.1 This specification covers several grades of carbon and alloy steel seamless mechanical tubing. The grades are listed in Tables 1-3. When welding is used for joining the weldable mechanical tube grades, the welding procedure shall be suitable for the grade, the condition of the components, and the intended service.

1.2 This specification covers both seamless hot-finished mechanical tubing and seamless cold-finished mechanical tubing in sizes up to and including 12 3/4 in. (323.8 mm) outside diameter for round tubes with wall thicknesses as required.

1.3 The tubes shall be furnished in the following shapes, as specified by the purchaser: round, square, rectangular, and special sections.

1.4 Supplementary requirements of an optional nature are provided and when desired shall be so stated in the order.

1.5 The values stated in inch-pound units are to be regarded as the standard. The values given in parentheses are for information only.

2. Referenced Documents

ASTM Standards

A370 Test Methods and Definitions for Mechanical Testing of Steel Products
A1040 Guide for Specifying Harmonized Standard Grade Compositions for Wrought Carbon, Low-Alloy, and Alloy Steels
E59 Practice for Sampling Steel and Iron for Determination of Chemical Composition (withdrawn)

Military Standards

MIL-STD-163 Steel Mill Products Preparation for Shipment and Storage

Federal Standard

Fed.Std.No.123 Marking for Shipment (Civil Agencies)

Index Terms
alloy steel tube; carbon steel tube; mechanical tubing; seamless steel tube; steel tube;
For more details, please contact us
Home | About Us | Product | Know How | Contact Us
Copyright © TubeMFG. Powered by TubeSolution